DISPLAY

_images/12_CP_display.png

INFO

Actual Resolution => See what resoultion we are currently displaying

Possible => Ask the attached device which resolution it is capable of

RESOLUTION

Default => Everytime we boot, we ask the attached device for the resolution

1920 x 1080 => Force the PocketVJ to always output in this resolution (needs reboot)

Note

  • Mapper will only work up to 1920 x 1080 resolution and default flip setting

  • If forced to 1920 x 1200 you may encounter glitch issues!

ROTATE & FLIP

Rotate or flip the output => Needs reboot

SLEEP

Set the display and GPU to sleep or wakeup

PROJECTOR

_images/12_CP_projector.png

Note

  • Make sure to connect a PJlink compatible projector via rj45 cable

  • Default ip is: 192.168.2.254

  • Disable password and powersettings on projector

  • Some projectors act weird, this is not my fault, before complaining check if you are able to power them off from CP

  • You are able to control several projectors, give them all the same ip or add their Ip to the script

see video tutorial: https://video.pocketvj.com/AVideo/video/25/pocketvj-pjlink-a-projector