CONTROL PANEL

Videotutorial: https://video.pocketvj.com/AVideo/video/15/pocketvj_rtc_overview

  1. Make sure your PocketVJ is powered up and running.

  2. On your computer, phone or tablet, go to the wifi and connect to your PocketVJ’s Wifi network. Its named vj100 or something similar starting with vj___.

_images/02_Wifi_select.png
  1. Enter the password fot the wifi connection (its printed onto the paper card) and wait until the connection is established.

_images/02_Wifi_password.png
  1. Open a web-browser (use chrome) and enter into the wifi ip of your PocketVJ into the address bar: http://2.0.0.100 (this is depending on wifi name, see on the printed card). You see the Control Panel:

_images/02_ControlPanel.png

Note

  • Alternatively you can connect your PocketVJ via rj45 wired network (see below).

  • Make sure your router is configured to 192.168.2.1. Access via address: http://192.168.2.***

  • If you lost the sticker with the IP address, go to “Network Settings” and click ‘Display IP’.

  • There are some known issues with Safari / Edge / IE browsers = Use Chrome and its derivates.

    IF YOU HAVE TROUBLE CONNECTING, CHECK THE TROUBLESHOOTING SECTION OF THIS MANUAL!

OUTPUT WINDOW

Below the shortlinks you have the Output Window which will display messages from selected functions:

_images/02_CP_output.png

COLORED TABS

The colored tabs contain the various control sections:

_images/02_CP_tabs.png

which are explained on the following pages.

DIRECT CONNECTING WITH RJ45

see video tutorial